(1) With only 40mm fork length, specially designed for pipelines and confined spaces.
(2) The lowest detectable medium density is as low as 0.5g/cm³.
(3) With strong anti-interference function, not influenced by foam, bubbles, viscosity, oscillation and other liquid characteristics.
(4) Industry-leading performance for high temperature applications. Process temperature can reach up to 250℃.
(5) High sensitivity due to the precisely pre-adjusted harmonic resonant frequency of the fork.
(6) The certificates for Intrinsically-Safety and Explosion-Proof allow the operation in hazardous areas.

Continuous, non-contact level measurement of liquids, pastes, granulates, powders and other solids, high and narrow silos, hoppers or containers

Thermocouples measure temperature based on voltage potential. They consist of two dissimilar electrical conductors that are joined in electrical junctions. When the junctions are at different temperatures, it produces a temperature-dependent voltage as a result of the thermoelectric effect, and you can interpret this voltage to measure temperature.

• Full compatibility with worldwide HART® devices 

● Accurate mass flow, volume flow, density and temperature measurement, gas mass flow measurement.
● Double U-type measuring tube with high sensitivity.
● The transmitter uses high-performance microprocessor, OLED display, and the parameters are convenient and fast.
● The transmitter has the self-test and self-diagnosis functions.
● Two-way measurement.
● The measurement is not affected by the changes in the fluid density, viscosity, and temperature.
● No installation and environmental impact, to maintain long-term stability.
● Simple installation, no need for straight pipe section and rectification.
● High temperature, ultra-low temperature, high pressure type applications.
● The Ex explosion-proof type which can be used in dangerous places.

Used in hydraulic process control, aviation and aerospace, auto industry, medical
equipment and hydraulic piping system.
Pressure range: from 0~1000 Bar
Optional output: 4~20mA, 0~5Vdc, 0~10Vdc, 0.5~4.5Vdc etc
Wetted parts: SUS304, SUS316

Compact Design, the total length 160.5mm, the maximum diameter 31.5mm, the fork length only 38mm
Especially suitable for liquid limit measurement of pipelines and narrow Spaces

• Continuous, non-contact level measurement
• Maintenance free operation
• Measures independent of varying medium characteristics
• Suitable for profile measurement on conveyor belts
• Suitable for use in corrosive environments
• Available with optional mounting bracket for easy alignment of the sensor

Used in semiconductor fluid pressure measurement system in the boundaries of ultra-high purity (UHP).
Pressure range 0~5000psi
Output Signal 4~20mA Analog Signal
Compliance with SEMI F19, Ra＜0.13 μm
100 Helium leak test and packed in class 100 clean room
Digital circuit compensation
Strong anti-interference and excellent long-term stability
Available for measurement of absolute pressure, gauge

Precision pressure measurement from 0 ... 10 to 0 ... 1000 bar 

Pressure technology solutions include capacitive, piezoresistive and other sensors to provide essential process data in differential, gage and absolute pressure applications. These sensors measure pressure, level, flow and derivatives by physically responding to the changes in process pressure, converting the physical movement into an electrical signal.

Advanced monocrystalline silicon differential pressure sensor adopted
Double-wire mode, 4～20mA analog output, HART® protocol digital communication option
Intelligent LCD gauge outfit with backlight
With both the remote transmission and the local zero and pressure range adjustment
Complete varieties, high accuracy, good stability, Isolation ex-proof housing structure, strong resistance to the frequency conversion interference
High static pressure, high overload protection
Patented double overload protection diaphragm design
Lightning protection circuit design

Pressure technology solutions include capacitive, piezoresistive and other sensors to provide essential process data in differential, gage and absolute pressure applications. These sensors measure pressure, level, flow and derivatives by physically responding to the changes in process pressure, converting the physical movement into an electrical signal.

Double-wire mode, 4～20mA analog output, HART® protocol digital communication option
Intelligent LCD gauge outfit with backlight
With both the remote transmission and the local zero and pressure range adjustment
Complete varieties, high accuracy, good stability,
Isolation ex-proof housing structure, strong resistance to the
frequency conversion interference
High static pressure, high overload protection
Patented double overload protection diaphragm design
Lightning protection circuit design

Used in biological engineering, medicine, dairy, food & beverage, coating and paint detection system.
Pressure range from 10kPa~2.5Mpa
Optional output 4~20mA
LED digital display
316L flush diaphragm structure adopted for pressure connection
Sanitary, anti-fouling
With cooling tower, excellent performance for high temperature medium application
Optional output signal, can be customized
Wetted parts stainless steel

Used in hydraulic Air compressor, Water treatment，Environmental and HVAC industry.
Pressure range: from 0~60 Bar (Gauge or Absolute)
Optional output: 4~20mA, 0~5VDC, 0.5~4.5VDC, 0~10VDC